Skip to main content
  • Genome Announcement
  • Open access
  • Published:

The genome of Clostridium difficile 5.3

Abstract

Background

Clostridium difficile is the leading cause of infectious diarrhea in humans and responsible for large outbreaks of enteritis in neonatal pigs in both North America and Europe. Disease caused by C. difficile typically occurs during antibiotic therapy and its emergence over the past 40 years is linked with the widespread use of broad-spectrum antibiotics in both human and veterinary medicine.

Results

We sequenced the genome of Clostridium difficile 5.3 using the Illumina Nextera XT and MiSeq technologies. Assembly of the sequence data reconstructed a 4,009,318 bp genome in 27 scaffolds with an N50 of 786 kbp. The genome has extensive similarity to other sequenced C. difficile genomes, but also has several genes that are potentially related to virulence and pathogenicity that are not present in the reference C. difficile strain.

Conclusion

Genome sequencing of human and animal isolates is needed to understand the molecular events driving the emergence of C. difficile as a gastrointestinal pathogen of humans and food animals and to better define its zoonotic potential.

Background

Clostridium difficile is a Gram-positive, spore-forming bacterium that over the last 40 years has emerged from obscurity to become a leading gastrointestinal pathogen in hospital environments [1]. The clinical features of disease range from non-haemorrhagic watery diarrhea to fatal episodes of pseudomembranous colitis and toxic megacolon. C. difficile disease is also community-acquired with incidence rates increasing [2]. In the past decade C. difficile has caused widespread outbreaks of neonatal diarrhea in piglets raising concerns that it may have a food-borne etiology. One porcine strain of C. difficile is frequently isolated from human cases of C. difficile disease in human in Europe, underscoring its zoonotic potential [3].

Non-toxigenic strains of Clostridium difficile have been isolated from patients with diarrhoeal disease [4]. Recent studies showing that nontoxigenic strains are capable of blocking colonisation and prevent disease caused by toxigenic strains indicates that much remains to be learned about virulence factors that play important roles in colonization of the gastrointestinal tract [5]. Here we report the sequence of nontoxigenic C. difficile strain 5.3 isolated from a patient with diarrhoea. The clinical presentation of this patient was of suspected Clostridium difficile infection. This was confirmed at the pathology laboratory with the isolation of only non-toxigenic C. difficile.

Methods

Isolation and DNA preparation

Clostridium difficile 5.3 originated from a faecal sample submitted from a female patient with the clinical symptomology of C. difficile infection. From the faecal sample 100 μ l of sample was added to cooked meat medium (TM0102 Oxoid Australia) and incubated anaerobically using the anoxomat system (MART Microbiology B.B., The Netherlands) at 37C for 24 hours. From here 200 μ l of the culture was transferred aseptically into a centrifuge tube and centrifuged at 10,000 rpm for 5 mins. The supernatant was discarded and the pellet resuspended in 1 ml of absolute ethanol and incubated at room temperature with periodic inversion for two hours.

A pellet was recovered by centrifuging at 10,000 rpm for 5 mins, the ethanol was discarded and the pellet resuspended in 100 μ l of brain heart infusion broth and spread plated onto Clostridium difficile selective agar (CC-BHIA + Taurocholate, PP2362 Oxoid Australia) and incubated anaerobically at 37 C for 24 hours. All plates were examined for colonies that morphologically represented C. difficile, from each plate colonies were selected and subcultured onto CC-BHIA + Taurocholate until pure cultures were achieved.

DNA was extracted from pure cultures by taking a single colony into 2 ml of brain heart infusion agar and incubating anaerobically at 37 C for upto 48 hours. The bacterial suspension was then vortexed and the DNA extracted using the DNeasy Blood and Tissue Kit (Qiagen, 69581) using the manufacturers instructions for the extraction of gram positive bacteria and the use of lysozyme.

Genome sequencing

DNA was quantified using qubit flourimetry and 0.5 ng gDNA was used as input to the Illumina Nextera XT library preparation protocol. Tagmentation of Genomic DNA, and PCR amplification of tagged DNA were performed as per manufacturer’s instructions. However the “PCR Clean-Up” and “Library Normalization” steps were omitted and size selection was instead performed by running balanced and pooled samples in a one percent agarose gel and excising the 600 bp to 1200 bp region of interest. The DNA was then purified from the agarose using Promega’s Wizard SV Gel and PCR Clean-Up System. Finally, an Agilent 2100 Bioanalyzer, with a High Sensitivity DNA Kit, was used to quantitate the pooled DNA library before loading onto the MiSeq with 23 other multiplexed samples. Paired-end 300 nt reads were generated using MiSeq V3 chemistry.

Assembly and annotation

The genome was assembled using a version of the A5 pipeline [6] called A5-miseq [7] that has been revised to process reads up to 500 nt long. Briefly, A5-miseq consists of five stages: (1) read quality filtering and error correction, (2) contig assembly, (3) permissive draft scaffolding, (4) misassembly detection, and (5) conservative scaffolding. The revised A5 pipeline uses a new version of idba_ud that uses read pairing information, and that has been modified to accept reads up to 500 nt long and to construct de Bruijn graphs with k-mers up to 500 nt. These modifications provide substantial improvements in assembly contiguity.

The genome was annotated with the RAST annotation system using FigFAM release 70 [8].

Quality assurance

A5-miseq includes a quality checking step that detects putative misassemblies by identifying clusters of read pairs that map to disjoint locations in the assembled genome. This method did not detect any putative misassemblies.

Initial findings

Sequencing generated 925,170 read pairs for a total of 555,102,000 nt that were assembled to reconstruct the 4,009,318 bp genome of C. difficile 5.3 in 27 scaffolds, with a scaffold N50 of 786 kbp and an N90 of 135 kbp. The raw (unfiltered) coverage is 138x, and after read filtering the assembly has a median depth of coverage of 60. The annotation of this assembly identified 3647 predicted CDS and 125 predicted RNA genes. 13 genes were identified as possibly missing from the assembly by the RAST system. The overall functional profile of the genome is shown in Figure 1. We conducted a phylogenetic analysis of C. difficile 5.3 using the PhyloSift software [9] to identify the most closely related organism with an available reference genome, using a phylogenetic placement [10] on a tree constructed from a set of 37 universally conserved genes. The resulting analysis assigned a posterior probability of 100% for C. difficile 5.3 diverging on the same lineage as Clostridium difficile 6503. Because Clostridium difficile 6503 has a draft-quality genome we used the closely related genome of Clostridium difficile 630 as a reference for further comparative analysis.

Figure 1
figure 1

Subsystems in C. difficile 5.3. 47% of the predicted CDS have been assigned to a subsystem in RAST. The functional category with the largest number of assigned CDS is carbohydrate metabolism, and C. difficile 5.3 has several genes in this functional category that are not present in the finished genome of C. difficile 630.

The scaffolds of C. difficile 5.3 were reordered to match the order in the finished genome of the closely related strain C. difficile 630 using the Mauve Contig Mover [11]. After reordering we find the genomes are free from large-scale rearrangement. Rearrangement breakpoints for some small translocated regions occur at sites annotated with phage-related gene functions, suggesting that bacteriophage may have lysogenized at different locations in each strain. The genome of C. difficile 5.3 was aligned to those of C. difficile BI1, C. difficile 2007855, and C. difficile 630 to characterize the extent of gene content sharing and genomic rearrangement. A visualization of the genome comparison produced by the Mauve software is shown in Figure 2. From this figure we can see that the majority of the genome is conserved among all four isolates, although some strain-specific regions exist.

Figure 2
figure 2

Genome alignment of C. difficile BI1, C. difficile 2007855, C. difficile 630, and C. difficile 5.3. A comparison of the four genomes as visualized by the Mauve software is shown. The four genomes are free from large-scale rearrangement, and exhibit high levels of sequence identity throughout their genomes, with a number of differentially conserved regions. Regions conserved among all genomes are shown in the color mauve, regions shared among subsets of the genomes are in different colors, regions unique to any particular genome are white.

Comparison of the gene content between C. difficile 5.3 and the finished C. difficile 630 reference genome identified 105 annotated gene functions predicted to be present only in C. difficile 5.3. In particular, genes related to metal resistance, bacitracin resistance, colicin resistance, drug efflux, and several phage-related genes are present only in C. difficile 5.3. These genes may contribute to the pathogenic phenotype of C. difficile 5.3. A full list of these genes has been provided in Additional file 1.

Future directions

Improved efficiency of the clinical genomics pipeline will enable fine-scale epidemiological monitoring of Clostridium difficile outbreaks.

Availability of supporting data

The draft genome assembly has been submitted to NCBI and assigned accession PRJNA232267. Genome annotations are available from the RAST web server under accession 6666666.54620 when logged in with username guest, password guest. The Illumina sequence reads have been deposited to the Short Read Archive and under accession SRX396630.

Abbreviations

RAST:

Rapid annotation using subsystem technology

A5:

Andrew and Aaron’s Awesome Assembly

gDNA:

genomic DNA

nt:

nucleotides.

References

  1. Squire MM, Riley TV: One Health: The human-animal-environment interfaces in emerging infectious diseases. Curr Top Microbiol Immunol. 2013, 365: 299-314.http://link.springer.com/chapter/10.1007/82_2012_237,

    PubMed  Google Scholar 

  2. Khanna S, Pardi DS, Aronson SL, Kammer PP, Orenstein R, St Sauver JL, Harmsen WS, Zinsmeister AR: The epidemiology of community-acquired clostridium difficile infection: a population-based study. Am J Gastroenterol. 2011, doi:10.1038/ajg.2011.398

    Google Scholar 

  3. Goorhuis A, Bakker D, Corver J, Debast SB, Harmanus C, Notermans DW, Bergwerff AA, Dekker FW, Kuijper EJ: Emergence of clostridium difficile infection due to a new hypervirulent strain, polymerase chain reaction ribotype 078. Clin Infect Dis. 2008, 47 (9): 1162-1170. 10.1086/592257.

    Article  CAS  PubMed  Google Scholar 

  4. Martirosian G, Szczesny A, Cohen SH, Silva Jr J: Isolation of non-toxigenic strains of clostridium difficile from cases of diarrhea among patients hospitalized in hematology/oncology ward. Polish J Microbiol. 2004, 53 (3): 197-200.

    Google Scholar 

  5. Nagaro KJ, Phillips ST, Cheknis AK, Sambol SP, Zukowski WE, Johnson S, Gerding DN: Nontoxigenic clostridium difficile protects hamsters against challenge with historic and epidemic strains of toxigenic bi/nap1/027 c. difficile. Antimicrob Agents Chemother. 2013, 57 (11): 5266-5270. 10.1128/AAC.00580-13.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  6. Tritt A, Eisen JA, Facciotti MT, Darling AE: An integrated pipeline for de novo assembly of microbial genomes. PLoS ONE. 2012, 7 (9): 42304-10.1371/journal.pone.0042304. doi:10.1371/journal.pone.0042304

    Article  Google Scholar 

  7. Coil D, Jospin G, Darling AE: A5-miseq: an updated pipeline to assemble microbial genomes from illumina miseq data. arXiv preprint arXiv:1401.5130. 2014,http://arxiv.org/abs/1401.5130,

    Google Scholar 

  8. Aziz R, Bartels D, Best A, DeJongh M, Disz T, Edwards R, Formsma K, Gerdes S, Glass E, Kubal M, Meyer F, Olsen G, Olson R, Osterman A, Overbeek R, McNeil L, Paarmann D, Paczian T, Parrello B, Pusch G, Reich C, Stevens R, Vassieva O, Vonstein V, Wilke A, Zagnitko O: The RAST server: Rapid Annotations using Subsystems Technology. BMC Genomics. 2008, 9 (1): 75-10.1186/1471-2164-9-75. doi:10.1186/1471-2164-9-75

    Article  PubMed Central  PubMed  Google Scholar 

  9. Darling AE, Jospin G, Lowe E, Bik HM, Eisen JA, Matsen IV FA: Phylosift: phylogenetic analysis of genomes and metagenomes. PeerJ. 2014, 2: 243-

    Article  Google Scholar 

  10. Matsen F, Kodner R, Armbrust EV: pplacer: linear time maximum-likelihood and Bayesian phylogenetic placement of sequences onto a fixed reference tree. BMC Bioinformatics. 2010, 11 (1): 538-10.1186/1471-2105-11-538. doi:10.1186/1471-2105-11-538

    Article  PubMed Central  PubMed  Google Scholar 

  11. Rissman AI, Mau B, Biehl BS, Darling AE, Glasner JD, Perna NT: Reordering contigs of draft genomes using the Mauve aligner. Bioinformatics. 2009, 25 (16): 2071-2073. 10.1093/bioinformatics/btp356.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

Download references

Acknowledgements

This work was supported by a collaboration between the NSW Department of Primary Industries and the ithree institute.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Aaron E Darling.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

TAC provided the DNA. PW constructed Illumina libraries and sequenced them. AED conducted the assembly, analysis, and data deposition. AED, TAC, SPD, and PW wrote the paper. IGC and PRC provided general direction. All authors read and approved the final manuscript.

Electronic supplementary material

13099_2013_165_MOESM1_ESM.xls

Additional file 1:Listing of gene functions present in Clostridium difficile 5.3 that are not found in the reference strain Clostridium difficile 630.(XLS 74 KB)

Authors’ original submitted files for images

Below are the links to the authors’ original submitted files for images.

Authors’ original file for figure 1

Authors’ original file for figure 2

Rights and permissions

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Cite this article

Darling, A.E., Worden, P., Chapman, T.A. et al. The genome of Clostridium difficile 5.3. Gut Pathog 6, 4 (2014). https://doi.org/10.1186/1757-4749-6-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1757-4749-6-4

Keywords